Peysanj is a series of geotechnical engineering modules such as bearing capacity and settlement, pressure-meter test, plate loading test, soil liquefaction analysis, etc bundled as single software.
Analysis Precast Girder Splice Alternatives
PGSplice is our spliced girder analysis software. This software has been developed for the Alternate Route Project.
Prestressed Girder SUPERstructure design and analysis
PGSuper is a powerful open source software for design and analysis of precast-prestressed girder bridges.
Analysis of Shear - Critical Reinforced Concrete Columns
The stand-alone Windows program Phaethon with user’s interface written in C++ offers analysis of shear - critical reinforced concrete columns to its user both for rectangular but also for circular reinforced concrete columns.
Analysis of FRP-Confined Reinforced Concrete Columns under Compression
PhaethonFRP application evaluates the contribution of FRP jacketing to the compressive strength and ductility of circular and rectangular reinforced concrete (RC) columns in terms of axial stress and strain, accounting for FRP jacket failure.
Pile Capacity, Design Load Estimation and Pile Group Settlement
The GEMS – Pile Group Settlement Analysis software uses modern analytical techniques based on the subsurface soil profile, pile dimensions and group geometry to estimate the pile group settlement.
Fast and Efficient Manner of Entering Pile Data
Pile Technician was developed for the FDOT to provide a fast and efficient manner of entering Pile data to calculate payment for work preformed by the contractor.
Behaviour Of Single Piles Under Axial Loading
PileAXL is a program that analyzes the behaviour of single piles under axial loading applied at the pile head for both onshore and offshore engineering problems.
Nonlinear Analysis of Pile Groups Under General Loading
PileGroup calculates the deformations and loads of pile groups subject to general three-dimensional loadings such as axial and lateral forces and moments applied on the pile caps.
Behaviour Of Single Piles Under Lateral Loading
PileLAT is a finite-element based program that analyzes the behaviour of single piles mainly under lateral loading based on p-y curves.
Pile Foundation Data Management Program
PileLink is a pile data management program, which encourages a standard approach to manage pile data and exchange data between project management, pile installation and pile monitoring companies.
Design and Analysis for Rock Socket under Axial Loading
PileROC is a program that predicts the load settlement curve at the pile head for the piles socketed into rock based on three commonly-used methods.
Deep Foundation Analysis and Design Solutions
PileSuite is a powerful suite of software products for deep foundation analysis and design for both onshore and offshore projects.
Open Channel Flow & Tank Empty Times
Flow Advisor can be used to estimate water flow rates from various open channels, closed channels and differently shaped supply tanks.
Flows & Pressures in Complex Networks
Pipe Flow Expert is designed to help todays engineers analyze and solve a wide range of problems where the flow and pressure loss throughout a pipe network must be determined.
Flow & Pressure Calcs on Single Pipes
Pipe Flow Wizard is able to perform four different flow and pressure drop calculations on a single pipe depending on the known information.
Processing Modflow version 5. 3 is included in the first edition of the book 3D-Groundwater Modeling with PMWIN published by Springer-Verlag.
Pocket ESA has been designed to minimize the amount of time required to generate standard Environmental Site Assessment reports and to maximize the flexibility of the final report.
Determine sectional forces and design statically indeterminate beams using PolyBeam, a simple beam calculator.
An Optimal Plastic Stringer Model Solution
Use the optimal plastic stringer model solution to design shear walls, concrete diaphragms etc.
You are on page 15 of 24
« First 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Next »
