SMath Studio is a tiny, powerful, free mathematical program with WYSIWYG editor and complete units of measurements support.
SMS (Surface-water Modeling System) is a complete program for building and simulating surface water models from Aquaveo.
SnailPlus is a powerful soil nailing wall analysis and design software program. SnailPlus analyzes soil nailing walls according to FHWA design standards and methodologies.
One-Dimensional Consolidation Test
SO-Consolidation is aimed at the evaluation of one-dimensional consolidation tests. In order to obtain coefficient of consolidation and secondary compression index, each loading step can be analyzed by two methods, logarithm and square root of time.
Bearing Capacity of Shallow Foundations
SO-Foundation calculates bearing capacity of shallow foundations considering both shear failure and settlement.
Geotechnical Engineering Boring Logs
SO-Log generates boring logs as a means to summarize and report several tests performed within a geotechnical engineering project.
SO-Shear is aimed at the evaluation of direct shear tests. It has a user-friendly interface and lots of smart capabilities are implemented.
Sieve Analysis, Hydrometer and Atterberg Limits Tests
SO-Sieve having a user-friendly interface, includes sieve analysis, hydrometer and Atterberg limits tests.
SO-Unconfined is aimed at the evaluation of unconfined compression tests. It has a user-friendly interface and lots of smart capabilities are implemented.
FEA software for civil and structural engineering
FEA software for civil and structural engineering modeling, analysis, design, and detailing.
Earthwork Optimization for Corridor Projects
Standalone road and corridor optimization tool. Works with designs created in other design software.
Grain Size Distribution Diagram
This is an application that can be used for analyzing Soil Sieve Test.
Analyze Gint Geotechnical Borehole Logs
SoilStats provides an intuitive way to analyze gINT geotechnical borehole logs.
Database System for Saturated / Unsaturated Soil Properties
SoilVision is a knowledgebase database system for saturated, unsaturated soil properties from sources all over the world.
Solarius PV is the BIM software for photovoltaic systems design already used for thousands of different types of installations all over the world.
3D Steel Auto Detailing System
A program moderate and affordable for small companies and even freelance steel detailers
Analysis, Design, And Investigation Of Reinforced Concrete Beams
spBeam (formerly pcaBeam) is highly efficient and widely used for analysis, design, and investigation of beams and one-way slabs in reinforced concrete floor systems.
Design and Investigation of Rectangular, Round and Irregular Concrete Columns
spColumn is widely used for design of shear walls, bridge piers as well as typical framing elements in buildings and structures.
Analysis Package For 2D and 3D Buildings And Structures
spFrame, formerly pcaFrame, is a feature-rich structural analysis program for two- and three-dimensional structures subject to static loads.
Design And Investigation of Concrete Foundations, Mats, Combined Footings, Pile Caps, Slabs On Grade
spMats is highly efficient and widely used for analysis, design and investigation of commercial building foundations and industrial mats and slabs on grade.
You are on page 20 of 23
It is deceiving because the picture of the interface says, "Beam - Section - Steel". You got to love the sense of humor! :)...
Was a bit hesitant to try at first but CMS IntelliCAD turned out to be a good alternative for me. The free trial worked immediately, which was good to try it out before paying for it. All the features it offers are user-...
Hello, I would like to know if Groundwater Vistas works with optimization models....
There are no instructions so examine one of the three examples in the Examples folder for what needs to happen. Program terminates without warning if you do anything that it does not like. Program works well once given d...
Here can we use Sectprop software because I got sectprop software from here but it is excel file? So I still don't know how to use sectprop software and sectprop software is excel file or not. Please suggest to me how to...