Open-source numerical software package
Euler is a free and open-source numerical software package.
3D Engineering Analysis for Underground Excavations
EX3 is an engineering analysis program for underground excavations in rock.
2D Stress Analysis for Underground Excavations
Examine2D is a 2-dimensional plane strain indirect boundary element program for the elastic stress analysis of underground excavations.
Discontinuous stress fields and strut-and-tie models
Fachwerk is aimed at structural engineers who analyse and design reinforced concrete structures.
Fachwerk3D is the spatial version of the program Fachwerk. It intends to simplify the application of discontinuous stress fields and strut-and-tie models.
Create, Edit and Visualize in 3d Space Digital Terrain Models
In FastTerrain you are able to create, edit and visualize in 3D space digital terrain models.
Static axial capacity of drilled shafts and driven piles
The FB-Deep computer program is a Windows based program used to estimate the static axial capacity of drilled shafts and driven piles.
Analyzing multiple bridge pier structures
The FB-MultiPier analysis program is a nonlinear finite element analysis program capable of analyzing multiple bridge pier structures interconnected by bridge spans.
Modeling Fluid Flow and Transport of Dissolved Constituents
FEFLOW is a professional software package to simulate a multitude of groundwater processes involving flow, contaminants, groundwater age and heat transport under fully or variably saturated conditions.
3D truss analyzer using finite element methods
Easy to use 3D truss analyzer using finite element methods. It has an easy graphical interface where you can define, loads, nodes and elements.
Design and analysis of 2D and 3D frame structures
Program suite FIN EC is a great tool for design and static and dynamic analysis of 2D and 3D frame structures.
Resultant of General Force System
The program is based on general principle of static equilibrium of forces in a plane.
Structural Analysis of 2D and 3D Frames
Frame3DD is free open-source software for static and dynamic structural analysis of 2D and 3D frames and trusses with elastic and geometric stiffness.
FreeCAD is a parametric 3D modeler. Parametric modeling allows you to easily modify your design by going back into your model history and changing its parameters.
Open Source Numerical Computing Environment
FreeMat is a free open source numerical computing environment and programming language, similar to MATLAB and GNU Octave.
Feasible Reliability Engineering Tool
FReET is a multipurpose probabilistic software for statistical, sensitivity and reliability analysis of engineering problems.
Embedded Retaining Wall Analysis
Frew enables engineers to define and solve even the most complex embedded retaining wall design problems quickly.
Ground Frost Penetration Analysis
Frost1D is a one dimensional ground frost penetration analysis program.
Finite Strip Computer Application
The FStr computer application gives to the user an easy and an intuitive elastic buckling analysis, through a Finite Strip Method, and its modal visualization of a thin-walled structural element.
Two-Dimensional Frame Analysis
Ftool provides a simple analysis program that merges, in the same interface, resources for effective creation and manipulation of the model, linked to a fast and effective code for visualization of the results.
You are on page 9 of 23
It is deceiving because the picture of the interface says, "Beam - Section - Steel". You got to love the sense of humor! :)...
Was a bit hesitant to try at first but CMS IntelliCAD turned out to be a good alternative for me. The free trial worked immediately, which was good to try it out before paying for it. All the features it offers are user-...
Hello, I would like to know if Groundwater Vistas works with optimization models....
There are no instructions so examine one of the three examples in the Examples folder for what needs to happen. Program terminates without warning if you do anything that it does not like. Program works well once given d...
Here can we use Sectprop software because I got sectprop software from here but it is excel file? So I still don't know how to use sectprop software and sectprop software is excel file or not. Please suggest to me how to...