Stand alone software version of the pavement design portion of the CE CALC website. Runs on the Windows . NET platform. Performs civil engineering calculations for traffic/road geometry, surveying/earthwork, pavement, concrete floors and unit c
With the aid of this program the displacements and the force distribution of a sheet pile wall construction can be calculated.
PERFORM-3D is a general tool for implementing displacement-based design, analysis and performance assesment for 3-d structures.
Peysanj is a series of geotechnical engineering modules such as bearing capacity and settlement, pressure-meter test, plate loading test, soil liquefaction analysis, etc bundled as single software.
PGSplice is our spliced girder analysis software. This software has been developed for the Alternate Route Project.
PGSuper is a powerful open source software for design and analysis of precast-prestressed girder bridges.
The stand-alone Windows program Phaethon with user’s interface written in C++ offers analysis of shear - critical reinforced concrete columns to its user both for rectangular but also for circular reinforced concrete columns.
Pile Technician was developed for the FDOT to provide a fast and efficient manner of entering Pile data to calculate payment for work preformed by the contractor.
PileAXL is a program that analyzes the behaviour of single piles under axial loading applied at the pile head for both onshore and offshore engineering problems.
PileGroup calculates the deformations and loads of pile groups subject to general three-dimensional loadings such as axial and lateral forces and moments applied on the pile caps.
PileLAT is a finite-element based program that analyzes the behaviour of single piles mainly under lateral loading based on p-y curves.
PileLink is a pile data management program, which encourages a standard approach to manage pile data and exchange data between project management, pile installation and pile monitoring companies.
PileROC is a program that predicts the load settlement curve at the pile head for the piles socketed into rock based on three commonly-used methods.
PileSuite is a powerful suite of software products for deep foundation analysis and design for both onshore and offshore projects.
Flow Advisor can be used to estimate water flow rates from various open channels, closed channels and differently shaped supply tanks.
Pipe Flow Expert is designed to help todays engineers analyze and solve a wide range of problems where the flow and pressure loss throughout a pipe network must be determined.
Pipe Flow Wizard is able to perform four different flow and pressure drop calculations on a single pipe depending on the known information.
PlanGrid is a construction app that lets contractors and architects collaborate with all their project plans, specs and photos.
Processing Modflow version 5. 3 is included in the first edition of the book 3D-Groundwater Modeling with PMWIN published by Springer-Verlag.
Point Layout construction layout software helps contractors and subcontractors bring model accuracy to the field.
You are on page 13 of 21