PCSheetPileWall Version:1.38 · Downloads:1440
PCSheetPileWall

Sheet Pile Wall Construction

With the aid of this program the displacements and the force distribution of a sheet pile wall construction can be calculated.

PERFORM-3D Version:7.0 · Downloads:514
PERFORM-3D

Nonlinear Analysis and Performance Assesment for 3-D Structures

PERFORM-3D is a general tool for implementing displacement-based design, analysis and performance assesment for 3-d structures.

Peysanj Version:5.2 · Downloads:348
Peysanj

Bearing Capacity

Peysanj is a series of geotechnical engineering modules such as bearing capacity and settlement, pressure-meter test, plate loading test, soil liquefaction analysis, etc bundled as single software.

PGSplice Version:0.7 · Downloads:460
PGSplice

Analysis Precast Girder Splice Alternatives

PGSplice is our spliced girder analysis software. This software has been developed for the Alternate Route Project.

PGSuper Version:2.9.2 · Downloads:997
PGSuper

Prestressed Girder SUPERstructure design and analysis

PGSuper is a powerful open source software for design and analysis of precast-prestressed girder bridges.

Phaethon Version:1.0 · Downloads:102
Phaethon

Analysis of Shear - Critical Reinforced Concrete Columns

The stand-alone Windows program Phaethon with user’s interface written in C++ offers analysis of shear - critical reinforced concrete columns to its user both for rectangular but also for circular reinforced concrete columns.

Pile Technician Version:7 · Downloads:657
Pile Technician

Fast and Efficient Manner of Entering Pile Data

Pile Technician was developed for the FDOT to provide a fast and efficient manner of entering Pile data to calculate payment for work preformed by the contractor.

PileAXL Version:2.3 · Downloads:486
PileAXL

Behaviour Of Single Piles Under Axial Loading

PileAXL is a program that analyzes the behaviour of single piles under axial loading applied at the pile head for both onshore and offshore engineering problems.

PileGroup Version:2.1 · Downloads:245
PileGroup

Nonlinear Analysis of Pile Groups Under General Loading

PileGroup calculates the deformations and loads of pile groups subject to general three-dimensional loadings such as axial and lateral forces and moments applied on the pile caps.

PileLAT Version:2 · Downloads:550
PileLAT

Behaviour Of Single Piles Under Lateral Loading

PileLAT is a finite-element based program that analyzes the behaviour of single piles mainly under lateral loading based on p-y curves.

PileLink Version:1.1.1 · Downloads:474
PileLink

Pile Foundation Data Management Program

PileLink is a pile data management program, which encourages a standard approach to manage pile data and exchange data between project management, pile installation and pile monitoring companies.

PileROC Version:2.1 · Downloads:284
PileROC

Design and Analysis for Rock Socket under Axial Loading

PileROC is a program that predicts the load settlement curve at the pile head for the piles socketed into rock based on three commonly-used methods.

Pipe Flow Advisor Version:1.01 · Downloads:67
Pipe Flow Advisor

Open Channel Flow & Tank Empty Times

Flow Advisor can be used to estimate water flow rates from various open channels, closed channels and differently shaped supply tanks.

Pipe Flow Expert Version:7.30 · Downloads:1590
Pipe Flow Expert

Flows & Pressures in Complex Networks

Pipe Flow Expert is designed to help todays engineers analyze and solve a wide range of problems where the flow and pressure loss throughout a pipe network must be determined.

Pipe Flow Wizard Version:1.12 · Downloads:810
Pipe Flow Wizard

Flow & Pressure Calcs on Single Pipes

Pipe Flow Wizard is able to perform four different flow and pressure drop calculations on a single pipe depending on the known information.

PMWIN Version:5.3.3 · Downloads:1836
PMWIN

Processing Modflow 5.3.3

Processing Modflow version 5. 3 is included in the first edition of the book 3D-Groundwater Modeling with PMWIN published by Springer-Verlag.

Point Layout Version:2019 · Downloads:381
Point Layout

Point Placement and Construction Layout

Point Layout construction layout software helps contractors and subcontractors bring model accuracy to the field.

PolyBeam Version:1.4.4 · Downloads:383
PolyBeam

A Simple Beam Calculator

Determine sectional forces and design statically indeterminate beams using PolyBeam, a simple beam calculator.

PolyStringer Version:1.0.2 · Downloads:19
PolyStringer

An Optimal Plastic Stringer Model Solution

Use the optimal plastic stringer model solution to design shear walls, concrete diaphragms etc.

Portal Version:1.34 · Downloads:3523
Portal

Predesign of Portal Frames According to Eurocode 3

PORTAL is a software to be used for the pre-design of single bay steel portal frames according to ENV and ENV 1993-1-1 for resistance checks.

You are on page 12 of 19

< First 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19  Next >

Most Popular Downloads

303439 hitsWest Point Bridge Designer v2016

Bridge Design Contest is a nationwide Internet-based competition intended to promote math, science, and technology education in US. West Point Bridge Designer provides you with the tools to model, test, and optimize a steel highway bridge.

23450 hitsLTBeam v1.0.11

LTBeam is a software which deals with the elastic Lateral Torsional Buckling of Beams under bending action about their major axis.

13800 hitsSAP2000 v20

From its 3D object based graphical modeling environment to the wide variety of analysis and design options completely integrated across one powerful user interface, SAP2000 has proven to be the most integrated, productive and practical general purpose structural program on the market today.

12032 hitsEBPlate v2.01

EBPlate is a piece of software developed by CTICM with a partial funding of the European Research Fund for Coal and Steel (RFCS). It assesses the critical stresses associated to the elastic buckling of plates loaded in their plan.

10913 hitsTRUSS4 v13

Software suite TRUSS4 is designed for analysis of timber truss structures connected with punched metal plate fasteners.

Recent Comments
Carlos Perez Neyra· 5 Aug 2019

Grzegorz thanks a lot! i could run it in compatibility! Well, right click in gala. exe, then properties, compatibility and finally in xp pack 2, thats all....

Surajit Ghosh· 3 Aug 2019

Great software and great support from the team. Thank you Krishna Kamath Ji: kkrishnakamath@gmail. com...

Swetha Thota· 25 Jul 2019

I have a problem regarding running of software. It shows that "Evaluation License is not found"...

KG· 23 Jul 2019

so useful....

Petro Nek· 19 Jul 2019

It is completely free. For commercial use too...