ColumnShear Version:1.0 · Hit:294
ColumnShear

Shear Capacity and Confinement Reinforcement of Columns

Calculates shear capacity and confinement reinforcement of circular and oblong shape reinforced concrete columns.

CompactSections Version:1.1.6 · Hit:71
CompactSections

Elastic and Plastic Bending Analysis

Structures Office supports construction of arbitrary cross-sections, computes area, elastic, and plastic section properties.

Compos Version:8.4 · Hit:13
 Compos

Analyse and Design Studded Composite and Non-Composite Steel Beams

Compos is a unique composite beam design software program to analyse and design studded composite and non-composite steel beams.

COMPOSITE-BEAM Version:8-06-3030 · Hit:51
COMPOSITE-BEAM

Design of Composite Beams According to ENV 1994-1-1:1992

The COMPOSITE-BEAM program performs design of composite beams according to ENV 1994‑1‑1:1992‑10.

Concise Beam Version:4.59 · Hit:553
Concise Beam

Design Of Precast Concrete Beams

Concise Beam is an easy to use program for the design of precast concrete beams.

Connection Study Environment Version:4.90 · Hit:545
Connection Study Environment

Steel Connections Design and Check

C. S. E. , Connection Study Environment, is a Windows software program completely devoted to the design, study and check of steel structures joints.   The C. S. E.

CRANEWAY Version:8-06-3030 · Hit:37
CRANEWAY

Design of Crane Runway Girders

The stand‑alone program CRANEWAY provides effective analysis and design of craneway girders.

Cross Section Analysis & Design Version:3.0 · Hit:478
Cross Section Analysis & Design

Structural Cross Sections (concrete, steel, composite etc.)

Cross Section Analysis and Design can handle structural cross sections that are built up of one or more geometric entities and can be drawn directly using the versatile featured user interface.

DECKSLAB Version:1.4 · Hit:723
DECKSLAB

Slab on Metal Deck Analysis & Design

Slab on metal deck analysis and design (both composite and form deck) per SDI and ACI 318-99.

Delta Beam Version:1.0 · Hit:602
Delta Beam

Continuous Beam Structural Analysis

Delta Beam is a continuous beam structural analysis software. It includes a full complement of features that makes it suitable for any job from a small beam to very complex beam structures.

Dimenes 1.5 rf Version:1.5 · Hit:314
Dimenes 1.5 rf

Calculator for sections of beams, columns and bars

Dimenes is a program useful to design metallic structures for the most common cases.

Distribution of Releasing Moments Version:1.01 · Hit:24
Distribution of Releasing Moments

Differential Temperature Effects on a Continuous Beam

This spreadsheet calculates the secondary effects (bending moments and shear forces) produced by the releasing moment from differential temperature effects on a continuous beam.

EBPlate Version:2.01 · Hit:8756
EBPlate

Elastic Buckling Of Plates

EBPlate is a piece of software developed by CTICM with a partial funding of the European Research Fund for Coal and Steel (RFCS). It assesses the critical stresses associated to the elastic buckling of plates loaded in their plan.

EBSTRA Version:3 · Hit:35
EBSTRA

Reinforced steel and concrete frames

EBSTRA helps you to create reinforced steel and concrete frames for vertical and horizontal loads. It will give displacements in inches, joint rotation in radians and moments.

Effective Span Version:1.02 · Hit:27
Effective Span

Effective Span of Plate Girder with no Bearing

The effective span and maximum bearing pressure for a plate girder with no specific bearing is calculated in accordance with BD 56/10 clause 16 and Figure 16. 1A

EngiLab Beam.2D Version:2.2 · Hit:675
EngiLab Beam.2D

Structural analysis of plane (2D) frames

EngiLab Beam. 2D 2014 is an easy-to-use yet powerful engineering tool for the structural analysis of plane (2D) frames for Windows, using a 3-DOFs (Degrees of Freedom) per node approach.

EngiLab Rod.2D Version:1.10 · Hit:380
EngiLab Rod.2D

Linear static analysis of plane (2D) trusses

EngiLab Rod. 2D is a powerful engineering tool for the linear static analysis of plane (2D) trusses for Windows, using a 2-Degrees of Freedom per node approach.

Fachwerk Version:0.4.4 · Hit:396
Fachwerk

Discontinuous stress fields and strut-and-tie models

Fachwerk is aimed at structural engineers who analyse and design reinforced concrete structures.

Fachwerk3D Version:0.4.4 · Hit:411
Fachwerk3D

Strut-and-tie models

Fachwerk3D is the spatial version of the program Fachwerk. It intends to simplify the application of discontinuous stress fields and strut-and-tie models.

FEMTA Version:0.7.1 · Hit:653
FEMTA

3D truss analyzer using finite element methods

Easy to use 3D truss analyzer using finite element methods. It has an easy graphical interface where you can define, loads, nodes and elements.

You are on page 3 of 7

< First 2 3 4 5 6 7  Next >

Most Popular Structural Analysis Downloads

11856 hitsLTBeam v1.0.11

LTBeam is a software which deals with the elastic Lateral Torsional Buckling of Beams under bending action about their major axis.

8756 hitsEBPlate v2.01

EBPlate is a piece of software developed by CTICM with a partial funding of the European Research Fund for Coal and Steel (RFCS). It assesses the critical stresses associated to the elastic buckling of plates loaded in their plan.

2061 hitsBAP v3.4

BAP is a continuous beam analysis program that solves for reactions, shear, moment, deflection, and rotation at points along the length of the beam.

1937 hitsCalc4fem vAlpha 07

Calc4fem is the open source spreadsheet for plane frames, beams and trusses calculation.

1794 hitsAnalysis for Windows v2.04

Very powerful Finite Element Analysis package for 2D and 3D constructions (frames and trusses).

Recent Comments
Juan Alberto Tello Fuentes· 24 Mar 2017

S. R. means "Stress Ratio", osea el porcentaje del esfuerzo máximo que soporta el elemento. El máximo es "1", donde los esfuerzos son iguales al esfuerzo admisible...

Bryan Patiño· 13 Mar 2017

Can you tell me the meaning for S. R. in the spreadsheet?...

Randall Edick· 17 Dec 2016

Great tool! Very nice GUI. Excellent online help. We used it for plastic bending analysis. Great to have two independent methods (Cozzone and Numerical) to cross check results....

Thor Jarl Berglund· 27 Nov 2016

In french ? :D...

Rhonrhon Bombita· 7 Jan 2016

Yes it's good and it work! Thanks for the CESDb. com and more power on you!...