CESDb > Most Popular Engineering Programs

List of top 50 most downloaded civil engineering software at CESDb.

SeismoMatch Version:2018 · Downloads:2783
SeismoMatch

Adjusting earthquake accelerograms

SeismoMatch is an application capable of adjusting earthquake accelerograms to match a specific target response spectrum, using the wavelets algorithm proposed by Abrahamson [1992] and Hancock et al.

ASCE702W Version:2.1 · Downloads:2760
ASCE702W

Analysis Of Wind Loading Per Asce 7-02 Code

ASCE702W is a spreadsheet program written in MS-Excel for the purpose of wind loading analysis for buildings and structures per the ASCE 7-02 Code.

BAP Version:3.4 · Downloads:2755
BAP

Beam Analysis Program

BAP is a continuous beam analysis program that solves for reactions, shear, moment, deflection, and rotation at points along the length of the beam.

Plane Frame Analysis for Static Loads Version:1.06 · Downloads:2754
Plane Frame Analysis for Static Loads

Bending Moments, Axial and Shears Forces in a Plane Frame

A Plane Frame Analysis for bending moments, axial and shears forces in a plane frame structure under point loads, UDL's, linearly varying distributed loads (soil pressures) and moments.

Archie-M Version:2.5.0.1 · Downloads:2714
Archie-M

Assess Arch Bridges

Archie-M was designed to help engineers to assess arch bridges.

A9CAD Version:2.2.1 · Downloads:2684
A9CAD

General purpose two-dimensional CAD program

A9CAD is a general purpose two-dimensional CAD program.

Civil Calculator Version:2.0 · Downloads:2630
Civil Calculator

Civil Engineering Calculations

Performs civil engineering calculations for hydrology, open channels, culverts, gravity sewer, transmission lines, traffic/road geometry, surveying/earthwork, pavement, concrete floors and unit conversions.

RISABase Version:2.1 · Downloads:2546
RISABase

Base Plate and Anchor Bolt Design

RISABase is a handy application that is designed to help structural engineers to analyze the behavior of complex base plate and anchor bolt models.

Slide Version:8.0 · Downloads:2507
Slide

2D Limit Equilibrium Slope Stability Analysis

Slide is the most comprehensive slope stability analysis software available, complete with finite element groundwater seepage analysis, rapid drawdown, sensitivity and probabilistic analysis and support design.

2D Frame Analysis Dynamic Edition Version:2.0 · Downloads:2498
2D Frame Analysis Dynamic Edition

Dynamic Frame Analysis

2D Frame Analysis is a powerfull application which uses optimized finite elements (beam elements) in order to perform static and dynamic analysis of beams, frames and trusses.

AxisVM Version:X5 · Downloads:2479
AxisVM

Structural Analysis and Design

Civil engineers use AxisVM for the analysis of structures with confidence that their final engineering product will meet the most up-to-date engineering analysis and design requirements.

12d Model Version:9.0 C2d · Downloads:2475
12d Model

Surveying, Civil and Water Engineering

Distributed in over 60 countries & on the market for over 20 years, 12d Model is a proven world leader in civil engineering, water engineering & land surveying software.

Reinforced Concrete Calculator Version:2.5 · Downloads:2329
Reinforced Concrete Calculator

Calculations Of Beams And Reinforced Concrete Slab

This application can be used to make quick parameters calculations of beams and reinforced concrete slab not only in the office but also at the construction site.

Influence Line Diagrams Version:1.04 · Downloads:2228
Influence Line Diagrams

Influence Line Diagrams for Single or Multispan Decks

Influence Line diagrams for bending moments at critical sections in a single or multi-span continuous beam.

Atlas Version:2.0 · Downloads:2223
Atlas

Moments and reaction forces for one-dimensional structures & beams

Atlas 2. 0 is a program targeted at architects and construction engineers.

You are on page 4 of 4

< First Page 2 3 4 

Recently Added Software

21/02/2020SFAT 1.10

SFAT is a fatigue life analysis software for steel structures, components, as well as welded and bolted connections in bridges, cranes, offshore platforms, offshore wind structures, and other structures subjected to cyclic loading.

7/02/2020Descon 7.1.5

Whether you work with structural connections constantly or just once in a while, Descon is a comprehensive tool that is used with each stage of the connection design process.

31/01/2020Etoolbox Free CAD Viewer 3.9

ETOOLBOX Free CAD Viewer is a mobile CAD application (*. dwg) viewer of the CMS IntelliCAD® CAD Software or any CAD software able to create *. dwg, *. dxf and *. dwf files.

24/01/2020ABC: ArcelorMittal Beams Calculator 3.49

ABC: ArcelorMittal Beams Calculator is a free pre-design tool for use in designing a variety of steel and composite structures such as portal frames, beam and column structures, trusses, and column-beam connections.

17/01/2020BlasTDOF 0.1.3

BlasTDOF is a free-to-use two-degree-of-freedom (TDOF) blast analysis software.

11/01/2020CMS IntelliCAD 9.2

CMS IntelliCAD Compatible CAD Software is the intelligent and affordable full-featured choice for engineers, architects and consultants, or anyone who communicates using CAD drawings.

10/01/2020AMECO 3.02

The purpose of AMECO software is to assess the life cycle of composite structures of buildings or bridges, evaluating the environmental footprint, in particular the associated energy consumption and greenhouse gas emissions.