CESDb > Most Popular Engineering Programs

List of top 50 most downloaded civil engineering software at CESDb.

West Point Bridge Designer Version:2016 · DL:391733
West Point Bridge Designer

WPBD Bridge Design Contest 2016

Bridge Design Contest is a nationwide Internet-based competition intended to promote math, science, and technology education in US. West Point Bridge Designer provides you with the tools to model, test, and optimize a steel highway bridge.

LTBeam Version:1.0.11 · DL:44750
LTBeam

Lateral Torsional Buckling of Beams

LTBeam is a software which deals with the elastic Lateral Torsional Buckling of Beams under bending action about their major axis.

FTOOL Version:4.0 · DL:23511
FTOOL

Two-Dimensional Frame Analysis

Ftool provides a simple analysis program that merges, in the same interface, resources for effective creation and manipulation of the model, linked to a fast and effective code for visualization of the results.

ETABS Version:19 · DL:22196
ETABS

Analysis, Design and Drafting of Building Systems

ETABS is the solution, whether you are designing a simple 2D frame or performing a dynamic analysis of a complex high-rise that utilizes non-linear dampers for inter-story drift control.

SAP2000 Version:22 · DL:21966
SAP2000

Structural Analysis and Design

From its 3D object based graphical modeling environment to the wide variety of analysis and design options completely integrated across one powerful user interface, SAP2000 has proven to be the most integrated, productive and practical general purpose structural program on the market today.

TRUSS4 Version:16 · DL:20334
TRUSS4

Roof Truss Design

Software suite TRUSS4 is designed for analysis of timber truss structures connected with punched metal plate fasteners.

BASEPLT9 Version:3.7 · DL:17543
BASEPLT9

Steel Column Base Plate Analysis per AISC 9th Ed

BASEPLT9 is a spreadsheet program written in MS-Excel for the purpose of analysis of steel column base plates.

EBPlate Version:2.01 · DL:17462
EBPlate

Elastic Buckling Of Plates

EBPlate is a piece of software developed by CTICM with a partial funding of the European Research Fund for Coal and Steel (RFCS). It assesses the critical stresses associated to the elastic buckling of plates loaded in their plan.

BEAMANAL Version:2.5 · DL:14862
BEAMANAL

Single-Span & Continuous-Span Beam Analysis

BEAMANAL is a MS-Excel spreadsheet workbook for the analysis of single-span beams (simple, propped, fixed, or cantilever) and continuous beams of up to 5 spans.

GRDSLAB Version:1.9 · DL:13848
GRDSLAB

Concrete Slab on Grade Analysis

GRDSLAB is a spreadsheet program written in MS-Excel for the purpose of analysis of concrete slabs on grade.

POLEFDN Version:2.3 · DL:13792
POLEFDN

Pole Foundation Analysis

POLEFDN is a spreadsheet program written in MS-Excel for the purpose of analysis of a pole foundation assuming the use of a rigid round pier which is assumed free at the top and subjected to lateral and vertical loads.

SMADA Version:6.44 · DL:13157
SMADA

Stormwater Management and Design Aid

This software is a complete hydrology package included as a number of separate executable files.

GoBeam Version:2019 · DL:11834
GoBeam

Continuous Beam Analysis for Excel

The easiest and most straight forward continuous beam analysis program available.

DECKSLAB Version:1.4 · DL:11636
DECKSLAB

Slab on Metal Deck Analysis & Design

Slab on metal deck analysis and design (both composite and form deck) per SDI and ACI 318-99.

FOOTINGS Version:3.7 · DL:9618
FOOTINGS

Rectangular Spread Footing Analysis

FOOTINGS is a spreadsheet program written in MS-Excel for the purpose of analysis of rigid rectangular spread footings with up to 8 total piers, and for either uniaxial or biaxial resultant eccentricities.

You are on page 1 of 4

First Page 2 3 4  Next Page »

Recently Added Software

6/12/2023Maple Flow 2023

Maple Flow makes it easy for engineers to brainstorm, develop, and document their design calculations. Maple Flow offers tools across the entire spectrum of math, science and engineering.

21/11/2023FAARFIELD 2.1

FAARFIELD, the FAA’s standard software for airport pavement thickness design and evaluation (AC 150/5320-6G, Airport Pavement Design and Evaluation) and pavement strength reporting using the ACR/PCR method.

19/11/2023Beam Column Imperfection 2023

Application allows to determine the movements, efforts and resistant capacity of the compressed parts, leaned according to strong axis, weak and torsion with double section, capable of buckling laterally.

19/11/2023Beam Column In & Out of Plane 2023

The following application allows determining the movements, forces, and resistant capacity of compressed pieces, bent along the strong, weak axis, and torsion with a double tee section, susceptible to lateral buckling.

7/03/2023ThinWallRes N My Mz 2023

ThinWallRes N My Mz allows to determine the resistant capacity of open and closed thin-walled sections subjected to axial and biaxial bending.

24/02/2023ThinWallRes N My Mz B 2023

ThinWallRes N My Mz B allows determining the resistant capacity of open thin-walled sections subjected to axial, biaxial and bi-moment bending.

22/02/2023Arch3D 2023

Arch3D makes it possible to determine the resistant capacity of compressed and flexed arches with a double tee section, susceptible to lateral buckling.