FB-Deep screenshot
SOFTWARE :FB-Deep
VERSION :1.21
PLATFORM :Windows
FILE SIZE :1.13 MB
LICENSE :Demo
DOWNLOADS :UserDownloads:1053
Program Description

The FB-Deep computer program is a Windows based program used to estimate the static axial capacity of drilled shafts and driven piles. The drilled shaft methodology is based upon Federal Highway Administration reports. Driven pile methodology utilizes two types of analyses: SPT and CPT.

  • SPT methodology is based on empirical correlations between cone penetrometer tests and standard penetration tests for typical Florida soil types. Unit end bearing resistance and unit skin friction resistance versus SPT N values are given in the FDOT research bulletin RB-121, for the different soil types.
  • Driven pile capacity calculated using CPT data can be determined by three separate methods.
  1. The first method is the Schmertmann method proposed by Schmertmann in 1978 (AASHTO LRFD Bridge Design Manual).
  2. The second method is the LCPC method proposed by Bustamante and Gianeselli for the French Highway Department in 1982.
  3. The third method is the UF method proposed by Bloomquist, McVay and Hu for the FDOT in 2007.

This download is a demo version. Demo version has the file save feature disabled. Note: The Demo version can not be used to update a licensed version.

* FB-Deep download link provides demo version of the software.

Similar Software
APILE Version:9.6 · Ensoft
APILE

Analysis of the Axial Capacity of Driven Piles

APILE is used to compute the axial capacity, as a function of depth, of a driven pile in clay, sand, or mixed-soil profiles.

LPILE Version:11.7 · Ensoft
LPILE

Analysis of Piles and Drilled Shafts Under Lateral Loads

LPILE is a special-purpose program based on rational procedures for analyzing a pile under lateral loading using the p-y method.

SHAFT Version:8.11 · Ensoft
SHAFT

Study of Drilled Shafts under Axial Loading

SHAFT is a computer program used to evaluate the axial capacity and the short-term, load-settlement curves of drilled shafts or bored piles in various types of soils.

FB-MultiPier Version:5.7 · Bridge Software Institute
FB-MultiPier

Analyzing multiple bridge pier structures

The FB-MultiPier analysis program is a nonlinear finite element analysis program capable of analyzing multiple bridge pier structures interconnected by bridge spans.

Brufem Version:4 · Bridge Software Institute
Brufem

Modeling, Analysis and Load Rating of Highway Bridges

The BRUFEM program is used to perform automated finite element modeling, analysis, and load rating of highway bridges using a complete 3-D model.

Comments & Reviews

No comments yet. Be the first to comment.

Submit a review about FB-Deep software with your social media profile

avatar
Rate This Software

FB-Deep has been rated 5.0 out of 5 points. A total of 1 votes cast and 0 users reviewed the software.

Popular Programs

13846 hitsPOLEFDN 2.3

POLEFDN is a spreadsheet program written in MS-Excel for the purpose of analysis of a pole foundation assuming the use of a rigid round pier which is assumed free at the top and subjected to lateral and vertical loads.

7774 hitsAllPile 7.19

AllPile is a Windows-based analysis program that handles virtually all types of piles, including steel pipes, H-piles, pre-cast concrete piles, auger-cast piles, drilled shafts, timber piles, jetted piles, tapered piles, piers with bell, micropiles (minipiles), uplift anchors, uplift plate, and shallow foundations.

7560 hitsDips 8.0

Dips is designed for the interactive analysis of orientation based geological data.

6861 hitsSlide 9.0

Slide is the most comprehensive slope stability analysis software available, complete with finite element groundwater seepage analysis, rapid drawdown, sensitivity and probabilistic analysis and support design.

New & Updated

14 JanRetainX 2022

Free retaining wall design software that fully works in a web browser. Create a stable retaining wall design using state-of-the-art software without downloading software.

13 JanDartis SPT Correlations 1.1.0

Dartis SPT is a powerful, user-friendly software for correlating soil properties from SPT blow counts. We have gone through many papers and geotechnical reference books and collected over 200 SPT correlations with various soil properties.

25 NovGaeaSynergy 4.0

GaeaSynergy is an application suite for geoscientific analyses, mapping, data display and data management. The program can be used to evaluate contaminants, soil and rock properties, mineral deposits, and oil and gas deposits.

18 NovWinLog 4.0

The WinLoG extension module of GaeaSynergy can be used to quickly and easily create, edit and print boring logs, borehole logs and well logs for a variety of industries.