CESDb > Structural Analysis > MITCalc Shafts
MITCalc Shafts screenshot
SOFTWARE :MITCalc Shafts
DEVELOPER :MITCalc
VERSION :1.27
PLATFORM :Spreadsheet
FILE SIZE :1.92 MB
LICENSE :Trial
DOWNLOADS :UserDownloads:4258
Program Description

The calculation is designed for geometrical designs and complex examinations of shafts.

The programme solves the following tasks:

  • Simple definition of installed shafts, including hollow ones.
  • Options of definitions of necking-down, recesses, grooves and calculation of the relevant coefficients of stress concentration.
  • Simple definition of spatial shaft load.
  • Calculation of reactions, courses of forces, moments, stress, deflection and bending angle of the shaft and others.
  • Calculation of critical speed and safety coefficients (dynamic, static).
  • Support of 2D and 3D CAD systems.

The calculation is based on data, procedures, algorithms and data from specialized literature and standards AGMA, ISO, DIN and BS. List of standards (DIN 743).

* MITCalc Shafts download link provides trial version of the software.

Similar Software
MITCalc Beam Calculation Version:1.24 · MITCalc
MITCalc Beam Calculation

Straight beams with a constant cross-section

The application is designed for calculations of straight, maximum three times static indefinite beams with constant axis-symmetrical profiles.

MITCalc Buckling Version:1.23 · MITCalc
MITCalc Buckling

Calculation Slender Strut (Column) Buckling

MITCalc Buckling is designed to calculate the optimum cross-section and perform strength check of slender struts strained for buckling

MITCalc Bolted Connections Version:1.28 · MITCalc
MITCalc Bolted Connections

Prestressed Bolt Connection

MITCalc Bolted Connections is designed for a geometrical design and strength check of a prestressed bolt connection, loaded by static or cyclic loading resp. , acting both in the axis of the bolt and in the plane of the connected parts.

MITCalc Version:1.76 · MITCalc
MITCalc

Mechanical, Industrial and Technical Calculations

MITCalc is the mechanical, industrial and technical calculations package. This professionally multi-language prepared package includes solutions for gearings, belt and chain drives, bearings, springs, beams, shafts, bolt joints and many others.

MITCalc Welded Connections Version:1.18 · MITCalc
MITCalc Welded Connections

Design and strength control of statically loaded welded connections

MITCalc Welded Connections is intended for the geometrical design and strength control of statically loaded welded connections of machine structures manufactured from carbon steels.

Comments & Reviews
Ramon Lozada
★★★
How can you ensure that the excel sheet with the mitcalc if free of malicoius code?

Submit a review about MITCalc Shafts software with your social media profile

avatar
Rate This Software

MITCalc Shafts has been rated 3.5 out of 5 points. A total of 4 votes cast and 1 users reviewed the software.

Popular Programs

44853 hitsLTBeam 1.0.11

LTBeam is a software which deals with the elastic Lateral Torsional Buckling of Beams under bending action about their major axis.

23591 hitsFTOOL 4.0

Ftool provides a simple analysis program that merges, in the same interface, resources for effective creation and manipulation of the model, linked to a fast and effective code for visualization of the results.

17593 hitsBASEPLT9 3.7

BASEPLT9 is a spreadsheet program written in MS-Excel for the purpose of analysis of steel column base plates.

17485 hitsEBPlate 2.01

EBPlate is a piece of software developed by CTICM with a partial funding of the European Research Fund for Coal and Steel (RFCS). It assesses the critical stresses associated to the elastic buckling of plates loaded in their plan.

New & Updated

19 NovBeam Column Imperfection 2023

Application allows to determine the movements, efforts and resistant capacity of the compressed parts, leaned according to strong axis, weak and torsion with double section, capable of buckling laterally.

7 MarThinWallRes N My Mz 2023

ThinWallRes N My Mz allows to determine the resistant capacity of open and closed thin-walled sections subjected to axial and biaxial bending.

24 FebThinWallRes N My Mz B 2023

ThinWallRes N My Mz B allows determining the resistant capacity of open thin-walled sections subjected to axial, biaxial and bi-moment bending.

22 FebArch3D 2023

Arch3D makes it possible to determine the resistant capacity of compressed and flexed arches with a double tee section, susceptible to lateral buckling.