CESDb > Geotechnical Engineering > ASDIP Retain
ASDIP Retain screenshot
SOFTWARE :ASDIP Retain
VERSION :4.7.6
PLATFORM :Windows
FILE SIZE :4.76 MB
LICENSE :Demo
DOWNLOADS :UserDownloads:2682
Program Description

ASDIP Retain is a suite of modules specifically dedicated to the design of retaining walls, based on the latest IBC / ACI 318 specifications, that greatly simplifies the time-consuming calculations in any structural engineering office.

ASDIP Retain includes the design of the following two types of retaining walls:

  • Cantilever Retaining Walls - Design of a retaining wall supported only at the base under the combination of earth pressure, surcharge, wind and seismic loads. The module designs the wall per the load combinations of the ASCE 7.
  • Restrained Retaining Walls - Design of a retaining wall supported at the base and laterally restrained at the top, also known as a basement wall, under the combination of earth pressure, surcharge, wind and seismic loads. The module designs the wall per the load combinations of the ASCE 7.

Trial Limitations:

  • Report | Print disabled
  • File | Save disabled
  • 15-day evaluation period

* ASDIP Retain download link provides demo version of the software.

Similar Software
ASDIP Foundation Version:4.3.9 · ASDIP Structural Software
ASDIP Foundation

Concrete Footing Design per the latest IBC, ACI 318 specifications

ASDIP Foundation is a suite of modules specifically dedicated to the design of concrete footings, based on the latest IBC / ACI 318 specifications, that greatly simplifies the time-consuming calculations in any structural engineering office.

ASDIP Concrete Version:4.4.7 · ASDIP Structural Software
ASDIP Concrete

Design of Concrete members per the latest IBC, ACI 318 specifications

ASDIP Concrete is a suite of modules specifically dedicated to the design of concrete members such as beams, columns and walls, based on the latest ACI 318 specifications.

ASDIP Steel Version:4.6.5 · ASDIP Structural Software
ASDIP Steel

Steel Design per the latest AISC specifications

ASDIP Steel is a suite of modules specifically dedicated to the design of structural steel members, based on the latest AISC specifications (AISC 360), that greatly simplifies the time-consuming calculations in any structural engineering office.

ASDIP Version:4.1.3 · ASDIP Structural Software
ASDIP

Structural Design Suite

Our 13-module structural suite with a broad range of design solutions required by the structural engineers of today, including concrete, steel, and masonry.

Redi Rock Wall Version:2018 · Fine Ltd
Redi Rock Wall

Retaining Wall Analysis

The program Redi Rock wall is used to design and check a retaining walls made from blocks produced by Redi-Rock, Inc (USA).

Comments & Reviews

No comments yet. Be the first to comment.

Submit a review about ASDIP Retain software with your social media profile

avatar
Rate This Software

ASDIP Retain has been rated 3.5 out of 5 points. A total of 4 votes cast and no one has reviewed the software yet.

Popular Programs

14902 hitsPOLEFDN 2.3

POLEFDN is a spreadsheet program written in MS-Excel for the purpose of analysis of a pole foundation assuming the use of a rigid round pier which is assumed free at the top and subjected to lateral and vertical loads.

8284 hitsAllPile 7.19

AllPile is a Windows-based analysis program that handles virtually all types of piles, including steel pipes, H-piles, pre-cast concrete piles, auger-cast piles, drilled shafts, timber piles, jetted piles, tapered piles, piers with bell, micropiles (minipiles), uplift anchors, uplift plate, and shallow foundations.

7976 hitsDips 8.0

Dips is designed for the interactive analysis of orientation based geological data.

7659 hitsSlide 9.0

Slide is the most comprehensive slope stability analysis software available, complete with finite element groundwater seepage analysis, rapid drawdown, sensitivity and probabilistic analysis and support design.

New & Updated

14 JanRetainX 2022

Free retaining wall design software that fully works in a web browser. Create a stable retaining wall design using state-of-the-art software without downloading software.

13 JanDartis SPT Correlations 1.1.0

Dartis SPT is a powerful, user-friendly software for correlating soil properties from SPT blow counts. We have gone through many papers and geotechnical reference books and collected over 200 SPT correlations with various soil properties.

25 NovGaeaSynergy 4.0

GaeaSynergy is an application suite for geoscientific analyses, mapping, data display and data management. The program can be used to evaluate contaminants, soil and rock properties, mineral deposits, and oil and gas deposits.

18 NovWinLog 4.0

The WinLoG extension module of GaeaSynergy can be used to quickly and easily create, edit and print boring logs, borehole logs and well logs for a variety of industries.