· > Alex Tomanovich
Alex Tomanovich

Alex Tomanovich is the developer of 26 civil engineering softwares currently listed at CESDb. Please visit developers website for software support, product updates, licenses and other information about BASEPLT9, FOOTINGS, IBC2009E, BOEF, ASCE705W, BEAMCOL9.

For more information please visit:

http://www.steeltools.org

Software by Alex Tomanovich
ASCE702S Version:1.3 · Hit:448
ASCE702S

Analysis Of Snow Loading Per Asce 7-02 Code

ASCE702S is a spreadsheet program written in MS-Excel for the purpose of flat roof snow loading analysis for buildings and structures per the ASCE 7-02 Code.

ASCE702W Version:2.1 · Hit:509
ASCE702W

Analysis Of Wind Loading Per Asce 7-02 Code

ASCE702W is a spreadsheet program written in MS-Excel for the purpose of wind loading analysis for buildings and structures per the ASCE 7-02 Code.

ASCE705I Version:1.1 · Hit:421
ASCE705I

Analysis Of Ice Loading On Structural Steel Per Asce 7-05 Code

ASCE705I is a spreadsheet program written in MS-Excel for the purpose of determining ice loading due to freezing rain on structural steel members per the ASCE 7-05 Code.

ASCE705S Version:1.7 · Hit:411
ASCE705S

Analysis Of Snow Loading Per Asce 7-05 Code

ASCE705S is a spreadsheet program written in MS-Excel for the purpose of flat roof snow loading analysis for buildings and structures per the ASCE 7-05 Code.

ASCE705W Version:1.4 · Hit:559
ASCE705W

Wind Loading Analysis Per The Asce 7-05 Code

ASCE705W is a spreadsheet program written in MS-Excel for the purpose of wind loading analysis for buildings and structures per the ASCE 7-05 Code.

BASEPLT9 Version:3.7 · Hit:871
BASEPLT9

Steel Column Base Plate Analysis per AISC 9th Ed

BASEPLT9 is a spreadsheet program written in MS-Excel for the purpose of analysis of steel column base plates.

BEAMANAL Version:2.5 · Hit:435
BEAMANAL

Single-Span & Continuous-Span Beam Analysis

BEAMANAL is a MS-Excel spreadsheet workbook for the analysis of single-span beams (simple, propped, fixed, or cantilever) and continuous beams of up to 5 spans.

BEAMCOL9 Version:3.5 · Hit:549
BEAMCOL9

Beam-Column Design per Aisc 9th Edition ASD Manual

Beam-Column design, focusing on flexural & axial stresses, including built-up sections not classified as plate girders (per AISC 9th Edition ASD Manual)

BMREINF9 Version:2.0 · Hit:443
BMREINF9

Analysis Of Beam Reinforcement per Aisc 9th Edition ASD Manual

BMREINF9 is a spreadsheet program written in MS-Excel for the purpose of analysis and code checking of steel members with various types of reinforcement configurations.

BOEF Version:1.6 · Hit:581
BOEF

Beam on Elastic Foundation Analysis

BOEF is a spreadsheet program written in MS-Excel for the purpose of analysis a finite length beam with free ends supported continuously on an elastic foundation.

DECKSLAB Version:1.4 · Hit:496
DECKSLAB

Slab on Metal Deck Analysis & Design

Slab on metal deck analysis and design (both composite and form deck) per SDI and ACI 318-99.

FOOTINGS Version:3.7 · Hit:619
FOOTINGS

Rectangular Spread Footing Analysis

FOOTINGS is a spreadsheet program written in MS-Excel for the purpose of analysis of rigid rectangular spread footings with up to 8 total piers, and for either uniaxial or biaxial resultant eccentricities.

FRAME Version:1.1 · Hit:232
FRAME

Portal and Gable Rigid Plane Frame Analysis

FRAME is a spreadsheet program written in MS-Excel for the purpose of plane frame analysis of portal and gable rigid plane frames subjected to various types of loading.

GRDSLAB Version:1.9 · Hit:547
GRDSLAB

Concrete Slab on Grade Analysis

GRDSLAB is a spreadsheet program written in MS-Excel for the purpose of analysis of concrete slabs on grade.

IBC2009E Version:1.1 · Hit:600
IBC2009E

Analysis of Seismic Loading per IBC2009 Code

Analysis of seismic loading per IBC2009 Code (and ASCE 7-05), using Equivalent Lateral Force method.

MOVLOADS Version:1.2 · Hit:397
MOVLOADS

Simple-Span Members Subjected To 1-8 Moving Wheel Loads

MOVLOADS is a spreadsheet program written in MS-Excel for the purpose of analysis of simple-span members subjected to from one up to eight moving wheel loads with up to seven wheel spacings.

PILEGRP Version:3.6 · Hit:375
PILEGRP

Pile Group Analysis for a Rigid Pile Cap/Mat

PILEGRP is a spreadsheet program written in MS-Excel for the purpose of analysis of pile groups with rigid caps using the elastic method.

POLEFDN Version:2.3 · Hit:403
POLEFDN

Pole Foundation Analysis

POLEFDN is a spreadsheet program written in MS-Excel for the purpose of analysis of a pole foundation assuming the use of a rigid round pier which is assumed free at the top and subjected to lateral and vertical loads.

ROOFDECK Version:1.0 · Hit:454
ROOFDECK

Roof Steel Deck Analysis & Design

ROOFDECK is a spreadsheet program written in MS-Excel for the purpose of analysis and design of roofs with steel deck.

STEPCOL Version:1.1 · Hit:376
STEPCOL

Stepped Column Analysis for Determining Effective Lengths

Stepped column analysis for determining effective lengths and effective length K factors.

STIFFNER Version:2.5 · Hit:401
STIFFNER

Steel Beam Web Stiffener Analysis

STIFFNER is a spreadsheet program written in MS-Excel for the purpose of analysis of steel beams subject to concentrated loads.

THERMAL Version:1.0 · Hit:368
THERMAL

Thermal Effects for Steel Building or Structure

THERMAL is a spreadsheet program written in MS-Excel for the purpose of considering the thermal effects for a steel building or structure.

TORSION9 Version:1.0 · Hit:496
TORSION9

Simplified Torsion Analysis For Steel Beams

Quick and simplified torsion analysis of W, S, M, and HP steel beams.

UGTANK Version:1.0 · Hit:382
UGTANK

Underground Storage Tank Anchorage Design

UGTANK. xls workbook is for the analysis and design of anchorage for underground storage tanks, obviously addressing the concerns of buoyancy.

WELDGRP Version:2.3 · Hit:419
WELDGRP

Weld Group Analysis per AISC 9th Ed.

WELDGRP is a spreadsheet program written in MS-Excel for the purpose of analysis of weld groups using either the ultimate strength method or the elastic method.

XBRACING Version:1.2 · Hit:386
XBRACING

Analysis Of Vertical Bents With Tension-Only X-Bracing

XBRACING is a spreadsheet program written in MS-Excel for the purpose of analyzing X-braced bents with tension-only systems.

Comments About Alex Tomanovich Products
Rhonrhon Bombita· 7 Jan 2016

Yes it's good and it work! Thanks for the CESDb. com and more power on you!...

Tarik Saad· 8 May 2015

Thanks for your help....