BuildQuantities.com is a specialized online platform providing precision construction calculators, material estimators, and technical reference resources. Designed to bridge the gap between physical site measurements and practical project planning, the platform focuses on delivering transparent, formula-driven material calculations for contractors, tradespeople, estimators, DIYers, and project teams. Use metric or imperial measurements to estimate material quantities. Each tool shows its formula, unit conversions, assumptions, and rounding. 

Available calculators 

• Asphalt volume and tonnage : Compacted volume, entered-density mass, supplier-rounded order and optional truck loads
• Bricks for walls and openings : Net wall area, base bricks, bond correction, allowance and supplier pack rounding
• Compost volume and bags : Direct-layer or mix-component compost volume, planning quantity, and optional whole packages
• Concrete volume and whole bags : Measured and planning volume, exact package quotient, whole bags, and purchased mixed capacity
• Concrete for beams : Cross-section area, volume per beam, total concrete, planning volume and whole packages
• Concrete blocks for walls and openings : Gross, opening, and net area; base units; allowance; whole standard units; and module layout ratios
• Concrete for columns : Cross-section area, volume per column, total concrete, planning volume, and whole packages
• Concrete footing volume : Section volumes, overlap deduction, measured total and planning volume
• Concrete for post holes : Gross hole volume, post displacement, net concrete, planning volume, and whole packages
• Concrete slab volume : Plan area, uniform slab volume, thickened edge, measured total and planning volume
• Concrete for walls : Gross wall volume, opening deduction, net concrete, planning volume and whole packages
• Straight deck-board rows and stock boards : Rows, linear length, row-plan boards and pooled lower bound
• Drainage gravel around a pipe : Gross trench zone, pipe displacement, placed gravel, supplier order, and optional mass
• Driveway base and surface gravel : Separate placed, loose-basis, supplier-rounded, and optional mass results for 2 driveway layers
• Drywall area and sheet layout checks : Net area, lower bound, horizontal and vertical grids
• Drywall joint compound packages : Base compound, allowance, whole containers and package remainder
• Drywall screw quantities and boxes : Base screws, allowance, usable stock, purchase count and whole boxes
• Drywall tape rolls : Joint tape length, allowance, whole rolls and roll remainder
• Expansion-joint materials : Selected slab-edge length, sealant volume, whole packages, filler length, and whole rolls
• Fill dirt volume : In-place and loose-order volume for uniform or linearly changing fill, plus optional mass
• Flooring area, pieces and boxes : Net area, allowance, whole pieces, boxes and box surplus
• Gravel volume : Measured area and volume, planning allowance, and optional supplier-density mass
• Tile grout packages and joint volume : Measured and planning area, whole packages, package surplus, joint share and theoretical joint volume
• Mortar bags for brick or block : Base and planning bag ratios, whole bags, purchased unit capacity, package surplus and dry product mass
• Mulch volume and bags : Cubic metres or cubic yards, net refresh depth, planning volume, and optional whole packages
• Wall and ceiling paint containers : Net area, coated area, litres or gallons, containers and surplus
• Pavers and full bundles : Net paved area, allowance, whole pavers, bundles and bundle surplus
• Bedding and joint sand for pavers : Paved area, bedding volume, supplier order, optional mass and packages, and joint-sand bags
• Play sand for a sandbox : Net sandbox volume, planning volume, optional mass, and whole packages
• Approved pool-base sand : Round, racetrack-oval, rectangular, or stated-area base volume with optional mass and packages
• Ready-mix order volume and loads : Measured and planning volume, supplier-rounded order, commercial-rule addition, and optional load split
• A rectangular rebar grid : Directional bar counts, actual spacing, installed length, lap-adjusted length, and stock bounds
• Roof area and package quantities : Sloped area, roofing squares, packages and surplus
• Sand volume and packages . Measured and planning volume, optional mass, and whole packages from documented product inputs
• Tile adhesive coverage and bags: Net and planning area, exact package ratio, whole bags, purchased capacity and package surplus
• Floor or wall tiles and cartons: Net tile area, allowance, whole tiles, cartons and carton surplus
• Topsoil volume and bags: Placed and loose-delivery volume, final planning quantity, and optional whole packages
• Trench excavation volume: In-place volume, loose planning volume, and estimated loads

* Build Quantities download link provides freeware version of the software.

Calculate Quantity Of Bricks, Concrete, Cement, Sand, Aggregate

Construction Calculator is a simple tool to calculate quantity of bricks, concrete, cement, sand, aggregate, concrete blocksand also calculate all shapes area.

Shape And Material Brisk Archive

Samba (Shape And Material Brisk Archive) is a software program very useful for structural designer, particularly of steel structures.

Predesign of 2D Frames In Steel, Concrete or Timber

1•2•Build is the ideal software to easily design beams, columns and simple 2D structures in steel, concrete of timber.

Pavement Design Calculator

Stand alone software version of the pavement design portion of the CE CALC website.   Runs on the Windows . NET platform.   Performs civil engineering calculations for traffic/road geometry, surveying/earthwork, pavement, concrete floors and unit c

Construction Management

This simple, yet efficient, construction management software is aimed at providing an overall preview of the project progress for top level management.

Submit a review about Build Quantities software with your social media profile