TZpile screenshot
SOFTWARE :TZpile
DEVELOPER :Ensoft
VERSION :3.6
PLATFORM :Windows
FILE SIZE :19.52 MB
LICENSE :Demo
DOWNLOADS :UserDownloads:493
Program Description

TZPILE implements the well-known method of soil-structure interaction, commonly called the t-z method, where t-z and Q-w curves are used respectively for load transfers in side resistance and end bearing. The t-z and Q-w curves can be internally-generated for both driven piles and drilled shafts with the input of information on the supporting soil and on the geometry of the pile.

Curves of short-term settlement as a function of applied loads are essential for some engineering computations; for example, when refined input is needed for the analysis of piles in a group. If a field-load test is performed, the computed curves can be "calibrated" by modifying input information to TZPILE to reach agreement with the experimental curves. The calibrated, site-specific curves can then be used with TZPILE to design the production piles, which may vary from the test piles in geometry and stiffness.

The main output provided by TZPILE is pile-head movement as a function of applied load. However, for any given load, the program can also present the load and movement along the length of the pile. In addition, the program allows the user to specify the settlement profile if the user would like to consider negative skin friction caused by downdrag. The program will use iterative solution to find the soil reaction based on the relative movement between the soil and the pile at the depth of interest. The neutral depth, which separates the negative and positive skin frictions, will be generated.

* TZpile download link provides demo version of the software.

Similar Software
Pile Group Settlement Analysis Version:1.0.0 · GEM Software
Pile Group Settlement Analysis

Pile Capacity, Design Load Estimation and Pile Group Settlement

The GEMS – Pile Group Settlement Analysis software uses modern analytical techniques based on the subsurface soil profile, pile dimensions and group geometry to estimate the pile group settlement.

SETOFF Version:4.1 · Ensoft
SETOFF

Analysis of Foundation Settlement

SETOFF analyzes foundation settlement of both, shallow and deep foundations, using commonly-accepted procedures.

APILE Version:9.6 · Ensoft
APILE

Analysis of the Axial Capacity of Driven Piles

APILE is used to compute the axial capacity, as a function of depth, of a driven pile in clay, sand, or mixed-soil profiles.

LPILE Version:11.7 · Ensoft
LPILE

Analysis of Piles and Drilled Shafts Under Lateral Loads

LPILE is a special-purpose program based on rational procedures for analyzing a pile under lateral loading using the p-y method.

Oasys Pile Version:19.7 · Oasys
Oasys Pile

Pile Load Capacity, Settlement and Surrounding Ground Displacement

Pile calculates the vertical load carrying capacities and vertical settlements of a range of individual piles in a layered soil deposit.

Comments & Reviews

No comments yet. Be the first to comment.

Submit a review about TZpile software with your social media profile

avatar
Rate This Software

No one has rated TZpile yet. Be the first to rate this product.

Popular Programs

13846 hitsPOLEFDN 2.3

POLEFDN is a spreadsheet program written in MS-Excel for the purpose of analysis of a pole foundation assuming the use of a rigid round pier which is assumed free at the top and subjected to lateral and vertical loads.

7774 hitsAllPile 7.19

AllPile is a Windows-based analysis program that handles virtually all types of piles, including steel pipes, H-piles, pre-cast concrete piles, auger-cast piles, drilled shafts, timber piles, jetted piles, tapered piles, piers with bell, micropiles (minipiles), uplift anchors, uplift plate, and shallow foundations.

7560 hitsDips 8.0

Dips is designed for the interactive analysis of orientation based geological data.

6861 hitsSlide 9.0

Slide is the most comprehensive slope stability analysis software available, complete with finite element groundwater seepage analysis, rapid drawdown, sensitivity and probabilistic analysis and support design.

New & Updated

14 JanRetainX 2022

Free retaining wall design software that fully works in a web browser. Create a stable retaining wall design using state-of-the-art software without downloading software.

13 JanDartis SPT Correlations 1.1.0

Dartis SPT is a powerful, user-friendly software for correlating soil properties from SPT blow counts. We have gone through many papers and geotechnical reference books and collected over 200 SPT correlations with various soil properties.

25 NovGaeaSynergy 4.0

GaeaSynergy is an application suite for geoscientific analyses, mapping, data display and data management. The program can be used to evaluate contaminants, soil and rock properties, mineral deposits, and oil and gas deposits.

18 NovWinLog 4.0

The WinLoG extension module of GaeaSynergy can be used to quickly and easily create, edit and print boring logs, borehole logs and well logs for a variety of industries.