DynaMat screenshot
SOFTWARE :DynaMat
DEVELOPER :Ensoft
VERSION :3.2
PLATFORM :Windows
FILE SIZE :36.2 MB
LICENSE :Demo
DOWNLOADS :UserDownloads:576
Program Description

The design of foundation for vibrating machines requires an accurate prediction of the foundation response. The method of analysis is complex because it involves the dimension and geometry of the machine foundation, the embedment effect, the material and radiation damping of soils, variation of soil properties with depth, and the interaction effect between the foundation and soils.

DynaMat uses a three dimensional hybrid method to estimate the equivalent dynamic stiffness and damping of machine foundations. Multiple soil layers can be specified and considered by the program.

The hybrid method contains finite elements that are employed in the near field in order to obtain a discrete solution. In the far field, a semidiscrete solution is synthesized from modes also calculated by the finite element method. The solutions are matched by applying the stationarity condition of a functional.

The finite element method is particularly attractive when dealing with problems involving complicated geometries and inhomogeneities. Thus it is widely used in soil-structure interaction studies. Finite elements are employed in the near field (neighborhood of the source of excitation or region of interest). However, because of the unboundedness of the soil region, the near field must be defined by introducing an artificial boundary. It is then necessary to apply conditions at this boundary in order to reproduce the effect of the far field (the complementary unbounded region).Ssince the objective in applying these conditions is to allow absortion or transmission of the waves impinging on the artificial boundaries, the conditions are referred to as absorbing or transmitting boundary conditions and the boundaries are known as absorbing or transmitting boundaries.

Input parameters consist of the dynamic properties of the layered soil, geometric configuration of the mat foundation, and definition of frequencies of analysis. The user specify the foundation with either circular or rectangular shape. The program will automatically generate the three dimensional finite element mesh for the analysis.

* DynaMat download link provides demo version of the software.

Similar Software
DynaPile Version:3.2 · Ensoft
DynaPile

Analysis of Pile Foundations Under Dynamic Loading

Program DynaPile was developed to compute the dynamic stiffness of single piles or pile groups.

DynaN Version:3.13 · Ensoft
DynaN

Dynamic Analysis of Shallow and Deep Foundations

DYNAN can be used for the dynamic analysis under transient and random loading in the time domain.

GeoMat Version:2.2 · Ensoft
GeoMat

Analysis of a Soil-Supported Mat or a Structural Slab

GeoMat is aimed at the solution under static loading of two classes of problems encountered in structural engineering: a soil-supported mat or a soil-supported structural slab.

SHAFT Version:8.11 · Ensoft
SHAFT

Study of Drilled Shafts under Axial Loading

SHAFT is a computer program used to evaluate the axial capacity and the short-term, load-settlement curves of drilled shafts or bored piles in various types of soils.

2D Frame Analysis Dynamic Edition Version:2.0 · EngiSSol
2D Frame Analysis Dynamic Edition

Dynamic Frame Analysis

2D Frame Analysis is a powerfull application which uses optimized finite elements (beam elements) in order to perform static and dynamic analysis of beams, frames and trusses.

Comments & Reviews

No comments yet. Be the first to comment.

Submit a review about DynaMat software with your social media profile

avatar
Rate This Software

No one has rated DynaMat yet. Be the first to rate this product.

Popular Programs

13838 hitsPOLEFDN 2.3

POLEFDN is a spreadsheet program written in MS-Excel for the purpose of analysis of a pole foundation assuming the use of a rigid round pier which is assumed free at the top and subjected to lateral and vertical loads.

7771 hitsAllPile 7.19

AllPile is a Windows-based analysis program that handles virtually all types of piles, including steel pipes, H-piles, pre-cast concrete piles, auger-cast piles, drilled shafts, timber piles, jetted piles, tapered piles, piers with bell, micropiles (minipiles), uplift anchors, uplift plate, and shallow foundations.

7560 hitsDips 8.0

Dips is designed for the interactive analysis of orientation based geological data.

6859 hitsSlide 9.0

Slide is the most comprehensive slope stability analysis software available, complete with finite element groundwater seepage analysis, rapid drawdown, sensitivity and probabilistic analysis and support design.

New & Updated

14 JanRetainX 2022

Free retaining wall design software that fully works in a web browser. Create a stable retaining wall design using state-of-the-art software without downloading software.

13 JanDartis SPT Correlations 1.1.0

Dartis SPT is a powerful, user-friendly software for correlating soil properties from SPT blow counts. We have gone through many papers and geotechnical reference books and collected over 200 SPT correlations with various soil properties.

25 NovGaeaSynergy 4.0

GaeaSynergy is an application suite for geoscientific analyses, mapping, data display and data management. The program can be used to evaluate contaminants, soil and rock properties, mineral deposits, and oil and gas deposits.

18 NovWinLog 4.0

The WinLoG extension module of GaeaSynergy can be used to quickly and easily create, edit and print boring logs, borehole logs and well logs for a variety of industries.