CESDb > Structural Analysis > RoofDek Analysis
RoofDek Analysis screenshot
SOFTWARE :RoofDek Analysis
DEVELOPER :Tata Steel
VERSION :1.1
PLATFORM :Windows
FILE SIZE :39.32 MB
LICENSE :Freeware
DOWNLOADS :UserDownloads:1084
Legacy Software Notice:
Please be advised that RoofDek Analysis is considered outdated or legacy, and it has reached the end of its support and update cycle. As a result, compatibility issues may arise, and its functionality cannot be guaranteed on modern computer systems.
Program Description

The software affords exceptional design refinement, which naturally leads to the most efficient deployment of roof decks. It provides a sophisticated approach, devoid of the simplifications, conservatism and inevitable compromises of traditional design techniques.

Scope

  • This calculation checks the design of Tata Steel structural roof decks subject to perpendicular imposed loads. In plane loading is not checked in these calculations, contact TATA technical department if needed.
  • The calculation allows you to analyse any selected roof deck of up to 4 spans, the end spans may be defined as cantilevers. Extended end laps of between 10% and 20% of span can be included, with a different deck thickness at each side with up to 20 loads per span, 20 loads per support, 8 different load cases and 20 load combinations.

References

  • Eurocode 3: Design of steel structures - Part 1-3: General rules – Supplementary rules for cold formed members and sheeting
  • UK National Annex NA to BS EN 1993-1-3:2006
  • Eurocode 3: Design of steel structures - Part 1-5: Plated structural elements
  • UK National Annex NA to BS EN 1993-1-5:2007
  • Eurocode 9: Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
  • UK National Annex NA to BS EN 1999-1-4:2007

Assumptions and limitations

  • The calculation is intended for use in the analysis and design of structural decking used to support roof elements.
  • Deflection is calculated by using unfactored load combinations.

* RoofDek Analysis download link provides freeware version of the software.

Similar Software
ROOFDECK Version:1.0 · Alex Tomanovich
ROOFDECK

Roof Steel Deck Analysis & Design

ROOFDECK is a spreadsheet program written in MS-Excel for the purpose of analysis and design of roofs with steel deck.

CoP2 Version:2.1.3 · ArcelorMittal
CoP2

Steel and Composite Joints Design in Accordance with Eurocode 3

COP is an innovative computer program for the design of joints in steel and composite structures.

DECKSLAB Version:1.4 · Alex Tomanovich
DECKSLAB

Slab on Metal Deck Analysis & Design

Slab on metal deck analysis and design (both composite and form deck) per SDI and ACI 318-99.

Eurocode 8 Pushover Version:1.0 · EarthquakeApps
Eurocode 8 Pushover

Nonlinear Static Analysis

The app is useful for analyzing the results of a nonlinear static analysis (pushover analysis) based on Eurocode 8, N2 method.

Zephyr Version:1.0 · cNumerics
Zephyr

Wind Analysis For Buildings In Accordances With Eurocode 1

Zephyr is a tool to assist engineers deal with Wind analysis for buildings in accordances with Eurocode 1 part 1-4

Comments & Reviews

No comments yet. Be the first to comment.

Submit a review about RoofDek Analysis software with your social media profile

avatar
Rate This Software

RoofDek Analysis has been rated 5.0 out of 5 points. A total of 1 votes cast and 0 users reviewed the software.

Popular Programs

44860 hitsLTBeam 1.0.11

LTBeam is a software which deals with the elastic Lateral Torsional Buckling of Beams under bending action about their major axis.

23593 hitsFTOOL 4.0

Ftool provides a simple analysis program that merges, in the same interface, resources for effective creation and manipulation of the model, linked to a fast and effective code for visualization of the results.

17599 hitsBASEPLT9 3.7

BASEPLT9 is a spreadsheet program written in MS-Excel for the purpose of analysis of steel column base plates.

17491 hitsEBPlate 2.01

EBPlate is a piece of software developed by CTICM with a partial funding of the European Research Fund for Coal and Steel (RFCS). It assesses the critical stresses associated to the elastic buckling of plates loaded in their plan.

New & Updated

19 NovBeam Column Imperfection 2023

Application allows to determine the movements, efforts and resistant capacity of the compressed parts, leaned according to strong axis, weak and torsion with double section, capable of buckling laterally.

7 MarThinWallRes N My Mz 2023

ThinWallRes N My Mz allows to determine the resistant capacity of open and closed thin-walled sections subjected to axial and biaxial bending.

24 FebThinWallRes N My Mz B 2023

ThinWallRes N My Mz B allows determining the resistant capacity of open thin-walled sections subjected to axial, biaxial and bi-moment bending.

22 FebArch3D 2023

Arch3D makes it possible to determine the resistant capacity of compressed and flexed arches with a double tee section, susceptible to lateral buckling.