CESDb > Structural Analysis > ASCE705W
ASCE705W screenshot
SOFTWARE :ASCE705W
DEVELOPER :Alex Tomanovich
VERSION :1.4
PLATFORM :Spreadsheet
FILE SIZE :0.88 MB
LICENSE :Freeware
DOWNLOADS :UserDownloads:7236
Program Description

ASCE705W is a spreadsheet program written in MS-Excel for the purpose of wind loading analysis for buildings and structures per the ASCE 7-05 Code. Specifically, wind pressure coefficients and related and required parameters are selected or calculated in order to compute the net design wind pressures. 

This program is a workbook consisting of nine (9) worksheets, described as follows:

  • Simplified - Analysis using simplified method for low-rise buildings with h <= 60’
  • MWFRS (Low-Rise) - Main Wind-Force Resisting System for low-rise buildings with h <= 60’
  • MWFRS (Any Ht.) - Main Wind-Force Resisting System for buildings of any height
  • Wall C&C - Analysis of wall Components and Cladding
  • Roof C&C - Analysis of roof Components and Cladding
  • Stacks & Tanks - Analysis of cantilevered chimneys, stacks, and vertical tanks
  • Open Structures (no roof) - Analysis of open structures without roofs
  • Wind Map - Basic wind speed map (Figure 6-1 of ASCE 7-05 Code)

Program Assumptions and Limitations:

1. Worksheet for "Simplified" analysis is applicable for low-rise buildings meeting the criteria of Section 6.4.1.

2. In the worksheet for Simplified analysis, the design MWFRS wind load is calculated for each direction. The design MWFRS load is assumed to be the total wind load on either the width or the length of the building respectively.

3. Worksheet for "MWFRS (Low-Rise)" is applicable for low-rise buildings as defined in Section 6.2.

4. Worksheets for "MWFRS (Any Ht.)", "Wall C&C", and "Roof C&C" are applicable for buildings with mean roof heights of up to 500 feet.

5. In worksheets for "MWFRS (Any Ht.)", "Wall C&C", and "Roof C&C" the user may opt to utilize user designated steps in height, 'z', in determining the wind pressure distribution.

6. Worksheets for "MWFRS (Any Ht.)", "Stacks & Tanks", and "Open Structures" can handle “rigid” as well as “flexible” buildings and structures. For “rigid” buildings or structures, this program uses the smaller value of either 0.85 or the calculated value from Section 6.5.8.1 of the Code for the gust effect factor, 'G'. For “flexible” buildings or structures, this program calculates the gust effect factor, ‘Gf’, per Section 6.5.8.2 of the Code based on the assumed formula for the fundamental period of vibration from Section 12.8.2.1 of the Code, where the exponent 'x' in the formula T = Ct*h^x is assumed to be 0.75.

7. Worksheets for "Wall C&C" and "Roof C&C" are applicable for flat roof buildings, gable roof buildings with roof angles <= 45 degrees, and monoslope roof buildings with roof angles <= 3 degrees.

8. Worksheet for "Stacks & Tanks" is applicable for cantilevered structures up to 600 feet tall.

9. Worksheet for "Open Structures" is applicable for open structures without roofs up to 500 feet tall. This can be utilized for open process-type structures as well as pipe/utility racks and bridges.

10. This program uses the equations listed in the reference, “Guide to the Use of the Wind Load Provisions of ASCE 7-02” for determining the external wind pressure coefficients, ‘GCp’, used in the Wall C&C and Roof C&C worksheets. (Note: a version of this document applicable to the ASCE 7-05 Code was not available.)

11. This program contains numerous “comment boxes” which contain a wide variety of information including explanations of input or output items, equations used, data tables, etc. (Note: presence of a “comment box” is denoted by a “red triangle” in the upper right-hand corner of a cell. Merely move the mouse pointer to the desired cell to view the contents of that particular "comment box".)

* ASCE705W download link provides freeware version of the software.

Similar Software
ASCE702W Version:2.1 · Alex Tomanovich
ASCE702W

Analysis Of Wind Loading Per Asce 7-02 Code

ASCE702W is a spreadsheet program written in MS-Excel for the purpose of wind loading analysis for buildings and structures per the ASCE 7-02 Code.

ASCE705S Version:1.7 · Alex Tomanovich
ASCE705S

Analysis Of Snow Loading Per Asce 7-05 Code

ASCE705S is a spreadsheet program written in MS-Excel for the purpose of flat roof snow loading analysis for buildings and structures per the ASCE 7-05 Code.

ASCE702S Version:1.3 · Alex Tomanovich
ASCE702S

Analysis Of Snow Loading Per Asce 7-02 Code

ASCE702S is a spreadsheet program written in MS-Excel for the purpose of flat roof snow loading analysis for buildings and structures per the ASCE 7-02 Code.

ASCE705I Version:1.1 · Alex Tomanovich
ASCE705I

Analysis Of Ice Loading On Structural Steel Per Asce 7-05 Code

ASCE705I is a spreadsheet program written in MS-Excel for the purpose of determining ice loading due to freezing rain on structural steel members per the ASCE 7-05 Code.

IBC2009E Version:1.1 · Alex Tomanovich
IBC2009E

Analysis of Seismic Loading per IBC2009 Code

Analysis of seismic loading per IBC2009 Code (and ASCE 7-05), using Equivalent Lateral Force method.

Comments & Reviews

No comments yet. Be the first to comment.

Submit a review about ASCE705W software with your social media profile

avatar
Rate This Software

ASCE705W has been rated 5.0 out of 5 points. A total of 5 votes cast and 0 users reviewed the software.

Popular Programs

44853 hitsLTBeam 1.0.11

LTBeam is a software which deals with the elastic Lateral Torsional Buckling of Beams under bending action about their major axis.

23591 hitsFTOOL 4.0

Ftool provides a simple analysis program that merges, in the same interface, resources for effective creation and manipulation of the model, linked to a fast and effective code for visualization of the results.

17593 hitsBASEPLT9 3.7

BASEPLT9 is a spreadsheet program written in MS-Excel for the purpose of analysis of steel column base plates.

17485 hitsEBPlate 2.01

EBPlate is a piece of software developed by CTICM with a partial funding of the European Research Fund for Coal and Steel (RFCS). It assesses the critical stresses associated to the elastic buckling of plates loaded in their plan.

New & Updated

19 NovBeam Column Imperfection 2023

Application allows to determine the movements, efforts and resistant capacity of the compressed parts, leaned according to strong axis, weak and torsion with double section, capable of buckling laterally.

7 MarThinWallRes N My Mz 2023

ThinWallRes N My Mz allows to determine the resistant capacity of open and closed thin-walled sections subjected to axial and biaxial bending.

24 FebThinWallRes N My Mz B 2023

ThinWallRes N My Mz B allows determining the resistant capacity of open thin-walled sections subjected to axial, biaxial and bi-moment bending.

22 FebArch3D 2023

Arch3D makes it possible to determine the resistant capacity of compressed and flexed arches with a double tee section, susceptible to lateral buckling.