CESDb > Structural Analysis > ASCE702S
ASCE702S screenshot
SOFTWARE :ASCE702S
DEVELOPER :Alex Tomanovich
VERSION :1.3
PLATFORM :Spreadsheet
FILE SIZE :0.32 MB
LICENSE :Freeware
DOWNLOADS :UserDownloads:2612
Legacy Software Notice:
Please be advised that ASCE702S is considered outdated or legacy, and it has reached the end of its support and update cycle. As a result, compatibility issues may arise, and its functionality cannot be guaranteed on modern computer systems.
Program Description

ASCE702S is a spreadsheet program written in MS-Excel for the purpose of flat roof snow loading analysis for buildings and structures per the ASCE 7-02 Code. Specifically, coefficients and related and required parameters are selected or calculated in order to compute the net design snow loads, including snow drift due on lower roofs and rain-on-snow surcharge.

Program Assumptions and Limitations:

1. This program specifically follows Section 7.0, Snow Loads, of the ASCE 7-02 Standard, "Minimum Design Loads for Buildings and Other Structures".

2. This program assumes only snow loading analysis for buildings with a flat roof, or low slope roof <= 5 degrees. (Note: for reference, a 1:12 roof slope equates to 4.76 degrees, and the program allows a slope up to 1.05:12.)

3. This program addresses only balanced snow loading, snow drifts on lower roofs, and rain-on-snow surcharge loading. Unbalanced roof snow loads are not considered.

4. This program assumes the possibility of either leeward or windward snow drifts, and the larger of the two calculated drift heights per the code is used as the design drift height. Leeward drift results from snow blown off a high roof onto a lower roof. Windward drift results from snow blown against a rojection or wall below a high roof.

5. This program determines any rain-on-snow surcharge loading when applicable. Rain-on-snow surcharge loading is not required for ground snow loads, pg > 20 psf, nor for roof slopes >= 0.5:12 (2.38 degrees). This program conservatively combines the rain-on-snow surcharge loading with snow drift loading. However, per Code, rain-on-snow surcharge loading need not be combined (superimposed) with snow drift loading.

6. This program contains numerous “comment boxes” which contain a wide variety of information including explanations of input or output items, equations used, data tables, etc. (Note: presence of a “comment box” is denoted by a “red triangle” in the upper right-hand corner of a cell. Merely move the mouse pointer to the desired cell to view the contents of that particular "comment box".)

* ASCE702S download link provides freeware version of the software.

Similar Software
ASCE705S Version:1.7 · Alex Tomanovich
ASCE705S

Analysis Of Snow Loading Per Asce 7-05 Code

ASCE705S is a spreadsheet program written in MS-Excel for the purpose of flat roof snow loading analysis for buildings and structures per the ASCE 7-05 Code.

ASCE702W Version:2.1 · Alex Tomanovich
ASCE702W

Analysis Of Wind Loading Per Asce 7-02 Code

ASCE702W is a spreadsheet program written in MS-Excel for the purpose of wind loading analysis for buildings and structures per the ASCE 7-02 Code.

ASCE705W Version:1.4 · Alex Tomanovich
ASCE705W

Wind Loading Analysis Per The Asce 7-05 Code

ASCE705W is a spreadsheet program written in MS-Excel for the purpose of wind loading analysis for buildings and structures per the ASCE 7-05 Code.

ASCE705I Version:1.1 · Alex Tomanovich
ASCE705I

Analysis Of Ice Loading On Structural Steel Per Asce 7-05 Code

ASCE705I is a spreadsheet program written in MS-Excel for the purpose of determining ice loading due to freezing rain on structural steel members per the ASCE 7-05 Code.

IBC2009E Version:1.1 · Alex Tomanovich
IBC2009E

Analysis of Seismic Loading per IBC2009 Code

Analysis of seismic loading per IBC2009 Code (and ASCE 7-05), using Equivalent Lateral Force method.

Comments & Reviews

No comments yet. Be the first to comment.

Submit a review about ASCE702S software with your social media profile

avatar
Rate This Software

ASCE702S has been rated 3.8 out of 5 points. A total of 4 votes cast and 0 users reviewed the software.

Popular Programs

44853 hitsLTBeam 1.0.11

LTBeam is a software which deals with the elastic Lateral Torsional Buckling of Beams under bending action about their major axis.

23591 hitsFTOOL 4.0

Ftool provides a simple analysis program that merges, in the same interface, resources for effective creation and manipulation of the model, linked to a fast and effective code for visualization of the results.

17593 hitsBASEPLT9 3.7

BASEPLT9 is a spreadsheet program written in MS-Excel for the purpose of analysis of steel column base plates.

17485 hitsEBPlate 2.01

EBPlate is a piece of software developed by CTICM with a partial funding of the European Research Fund for Coal and Steel (RFCS). It assesses the critical stresses associated to the elastic buckling of plates loaded in their plan.

New & Updated

19 NovBeam Column Imperfection 2023

Application allows to determine the movements, efforts and resistant capacity of the compressed parts, leaned according to strong axis, weak and torsion with double section, capable of buckling laterally.

7 MarThinWallRes N My Mz 2023

ThinWallRes N My Mz allows to determine the resistant capacity of open and closed thin-walled sections subjected to axial and biaxial bending.

24 FebThinWallRes N My Mz B 2023

ThinWallRes N My Mz B allows determining the resistant capacity of open thin-walled sections subjected to axial, biaxial and bi-moment bending.

22 FebArch3D 2023

Arch3D makes it possible to determine the resistant capacity of compressed and flexed arches with a double tee section, susceptible to lateral buckling.